VOOPOO PnP X Coil
- Open DTL or tighter RDL draw
- Even warmth from mesh heating
- Press-in fit, no screwing
- Four spare coils in every pack
Why you'll love it
- Seven resistances to match your liquid and your wattage
- Mesh heating design for even warmth through the coil
- Four-layer construction that VOOPOO calls patented and leak-proof
- Pushes in by hand, so changing coils is quick
- Clear fitment across the Drag, Argus and Uforce-X Nano kits we list
- Four coils per pack keeps spares in the drawer
At a glance
- Replaceable pods
- Yes
- Brand
- VOOPOO
- Model
- PnP X Coil
- Coil type
- Mesh, PnP X platform
- Resistance (confirmed ranges)
- 0.15, 0.2, 0.3, 0.45 and 0.6 ohm
- Power range 0.15ohm
- 60-80W
- Power range 0.2ohm
- 40-60W
- Power range 0.3ohm
- 32-40W
- Power range 0.45ohm
- 25-32W
- Power range 0.6ohm
- 20-28W
- Coil life
- Up to about 100ml of e-liquid
- Compatible with
- Drag X2, Drag S2, Drag X3, Drag S3, Argus Pro 2, Argus E40 and Uforce-X Nano tank
- Pack size
- 4 coils
- Resistance options
- 0.15ohm, 0.2ohm, 0.3ohm, 0.45ohm, 0.6ohm, 0.8ohm, 1.0ohm
Description
About these coils
If your Drag or Argus kit has gone dull or started to gurgle, the coil is the first thing to swap. These mesh coils are made for VOOPOO's PnP X system, and every pack holds four, so a spare is always to hand.
The mesh surface spreads heat evenly instead of concentrating it in one spot. VOOPOO also describes the four-layer construction as patented and leak-proof. Each coil is rated for roughly a hundred millilitres of liquid. Fitting takes seconds because you push it in by hand. There is nothing to screw.
Fits these kits
We have confirmed these coils for the Drag X2, Drag S2, Drag X3, Drag S3, Argus Pro 2, Argus E40 and the Uforce-X Nano tank.
Check your kit before you order. PnP X is its own system, so these coils will not fit the original Drag X or Drag S, and standard PnP coils will not fit the kits above.
Picking a resistance
Think of resistance as a dial for the draw. Low-ohm coils pull wide and take more wattage, which suits thick, VG-heavy liquid. High-ohm coils give a close, cool pull that suits nic salts.
- 60-80W on the 0.15ohm: a direct-to-lung (DTL) coil for the biggest, warmest clouds. Pair it with a high VG liquid.
- 40-60W on the 0.2ohm: also DTL, still open and vapour-rich, but easier on the battery.
- 32-40W on the 0.3ohm: works for DTL or restricted-lung (RDL). A good pick if you switch between the two.
- 25-32W on the 0.45ohm: an RDL coil with a snugger draw, for liquids that are not heavily VG.
- 20-28W on the 0.6ohm: a tight, cool draw made for nic salts.
Two further options sit above 0.6ohm, for anyone who wants an even tighter nic salt draw.
Specification
| Specification | Detail |
|---|---|
| Brand | VOOPOO |
| Model | PnP X Coil |
| Coil type | Mesh, PnP X platform |
| Resistance (confirmed ranges) | 0.15, 0.2, 0.3, 0.45 and 0.6 ohm |
| Power range 0.15ohm | 60-80W |
| Power range 0.2ohm | 40-60W |
| Power range 0.3ohm | 32-40W |
| Power range 0.45ohm | 25-32W |
| Power range 0.6ohm | 20-28W |
| Coil life | Up to about 100ml of e-liquid |
| Compatible with | Drag X2, Drag S2, Drag X3, Drag S3, Argus Pro 2, Argus E40 and Uforce-X Nano tank |
| Pack size | 4 coils |
| Resistance options | 0.15ohm, 0.2ohm, 0.3ohm, 0.45ohm, 0.6ohm, 0.8ohm, 1.0ohm |
What's in the box
- 4 x VOOPOO PnP X coils
Delivery & returns
-
Free Next-Day Delivery
On orders over £35
-
7-day dispatch
Same-day processing before 4pm, every day
-
Discreet tracked delivery
Plain packaging, full tracking
-
Expert support team
No chatbots. Speak to an expert.
VOOPOO PnP X Coil FAQs
How do I make the draw tighter or more open?
Change the resistance. Lower-ohm coils open the draw up and give more vapour with higher VG liquid, while higher-ohm coils tighten it and pair with nic salts. Seven resistances are available, so you can step up or down.
Can I use these in my Argus Pro 2 or Argus E40?
Yes. Both are on our confirmed list, along with the Drag X2, Drag S2, Drag X3, Drag S3 and Uforce-X Nano tank. The original Drag X and Drag S use a different coil system, so these will not fit them.
Do I need to screw the coil in?
No. It pushes into the kit by hand, so there is no screw thread to line up. Press it in firmly until it sits snug, then refill and wait a few minutes before your first draw.
What power should I run the 0.6ohm coil at?
Run it at 20-28W. That keeps the draw tight and cool, which is why this coil suits nic salt e-liquid. Staying inside the range stops the coil running hotter than it should.
How many coils come in a pack?
Each pack holds 4 PnP X coils, all in the resistance you choose. That gives you spares for several changes, so you can swap a coil as soon as the flavour dulls.
18+ For adults only. This product contains nicotine which is a highly addictive substance. We check age at checkout.