Vaporesso
Vaporesso XROS 6 Pod Vape Kit
£23.99 incl. VAT
- Tune the draw, tight to loose
- Fire by press or by inhale
- About five days between charges
- Quick USB-C top-ups
Why you'll love it
- Your existing XROS pods click straight in, whatever the resistance.
- A side slider moves the airflow from tight MTL to a looser RDTL pull.
- Two mesh pods supplied: one fitted for MTL, one spare for RDTL.
- Choose Eco, Normal or Power, or set your own wattage up to 30W.
- The screen shows charge left, power setting and puff count.
- A USB-C cable comes with it, and a full charge takes under 45 minutes.
At a glance
- Replaceable pods
- Yes
- Brand
- Vaporesso
- Model
- XROS 6
- Battery
- 1800 mAh
- Power
- 5-30W
- Screen
- 0.88 inch
- Coil resistance
- 0.4-1.2 ohm
- Colour options
- 11
Description
Getting to know the XROS 6
If you like to change your draw to suit the day, start with the airflow. A slider on the side of the XROS 6 moves from a snug MTL pull to a more open RDTL one, and it holds its position in a pocket. Firing is your choice too: press the button, or just inhale and let auto-draw do the work.
The 0.88 inch TFT screen reports how much charge is left, the power in use and your puff count. Fit a fresh pod, give the coil 60 seconds to prime, and you can start vaping.
Where it shines
- Inside the pod, the VENTURI channel tightens and then opens out. Vapour spreads more evenly across the coil, which takes some of the harshness out of an open pull.
- Three power modes cover the bases: Eco for longer between charges, Normal for everyday use, Power for a warmer, stronger draw. Tap the side button twice to cycle through them, or set the wattage yourself anywhere from 5W to 30W.
- At 1800mAh, this is the largest battery in the XROS family. An average MTL vaper should get around five days from a single charge.
- Charging runs at 3A over USB-C and takes under 45 minutes from flat. A quarter of an hour on the cable gives you several hours of use, and the plug works either way up. The cable is included.
- Anti-Leaking v2.0 is an upgraded pod seal, designed to keep liquid contained while a pod waits between uses.
- Eleven colours are available, with bodies in zinc alloy or aluminium alloy.
What it takes: pods, coils and e-liquid
The kit is refillable, so you add your own e-liquid. Two COREX 3.0 mesh pods are supplied: a 0.8 ohm pod already fitted for MTL, and a 0.6 ohm pod for restricted direct lung. Any pod from the XROS range will click in, from 0.4 ohm up to 1.2 ohm, so spares you already own carry over. Nic salts and 50/50 e-liquids both suit the included pods, and both work best with 50% VG blends or nic salts.
Specification
| Specification | Detail |
|---|---|
| Brand | Vaporesso |
| Model | XROS 6 |
| Battery | 1800 mAh |
| Power | 5-30W |
| Screen | 0.88 inch |
| Coil resistance | 0.4-1.2 ohm |
| Colour options | 11 |
What's in the box
- Vaporesso XROS 6 device
- 0.8 ohm COREX 3.0 mesh pod (pre-installed, MTL)
- 0.6 ohm COREX 3.0 mesh pod (RDTL)
- USB-C charging cable
Delivery & returns
-
Free Next-Day Delivery
On orders over £35
-
7-day dispatch
Same-day processing before 4pm, every day
-
Discreet tracked delivery
Plain packaging, full tracking
-
Expert support team
No chatbots. Speak to an expert.
Vaporesso XROS 6 Pod Vape Kit FAQs
Will my existing XROS pods work, and which pods come with it?
Yes. Any XROS pod from 0.4 ohm to 1.2 ohm fits the XROS 6. You also get two COREX 3.0 mesh pods supplied: a 0.8 ohm pod already fitted for MTL and a 0.6 ohm pod for RDTL.
Can the XROS 6 do restricted direct lung as well as MTL?
Yes. Slide the airflow control closed for a tight MTL pull, or open for a looser RDTL hit. The 0.6 ohm pod in the box suits RDTL better, while the 0.8 ohm pod is made for MTL.
Is the XROS 6 or the XROS Pro 2 the better fit?
The XROS Pro 2 is the flagship, with more power and a bigger battery. The XROS 6 has 1800mAh, up to 30W and three power modes, which covers everyday MTL and RDTL vaping.
How do I change power mode on the XROS 6?
Tap the side button twice to move between Eco, Normal and Power. You can also set the wattage by hand anywhere from 5W to 30W, handy when you switch between the 0.8 ohm and 0.6 ohm pods.
How soon can I vape after fitting a new pod?
Give the coil about 60 seconds to prime after fitting a fresh pod. Once that minute has passed, you can start vaping, so a pod change does not leave you waiting long.
You might also like
18+ For adults only. This product contains nicotine which is a highly addictive substance. We check age at checkout.